Open the battery compartment by pressing the latch and pulling back gently.
Insert the battery as shown and close the battery door.
Bring the camera within one to three feet (30 to 100 centimeters) of the base station.
Sync the camera to the base station:
If you are using an Arlo base station, press the Sync button on the side of the base station for about two seconds and then release the button.
Note: If you press the Sync button on the Arlo base station for too long, the LED under the USB symbol blinks amber for 10 minutes. While the USB LED is blinking amber, the sync process is blocked.
If you are using an Arlo Pro or Arlo Pro 2 base station, press the button on the top of the base station for about two seconds and then release the button.